Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why West Palm Beach Homeowners Choose Trane Air Duct Cleaning
Trane repair in West Palm Beach requires a technician who understands how Trane systems behave in subtropical humidity. We’re an independent Trane service provider, not a factory-authorized dealer, which means we answer to you, not a corporate warranty department. What separates our Trane work from every other duct cleaner in the county is simple: we’ve spent years disassembling Trane air handlers, plenums, and duct runs in this specific climate, and we know exactly where these systems fail. Call (728) 231-8154 for a free estimate, and we’ll tell you what we expect to find before we even open the cabinet.
Trane builds some of the most airtight, efficient air handlers on the market. The Hyperion series, the XV20i variable-speed heat pump, the RunTru line in condos along Flagler Drive. But every one of these systems has a specific vulnerability in West Palm Beach’s salt-laden, humid air. The tight coil rails that make Hyperion units efficient also trap dust and pet hair in places most technicians never look. We look. That’s the difference.
Why Trust Linden Air Duct West Palm Beach for Your Trane Air Duct Cleaning?
We don’t send someone who learned Trane by watching a video. Our crew has pulled hundreds of Trane blower assemblies, evaporator coils, and duct runs out of homes from El Cid to Flamingo Park, and we know the failure points by touch. Marcus Veale, our owner, completed his vocational HVAC training at Los Angeles Trade-Technical College and has spent years in West Palm Beach attics and mechanical closets, often in older construction where Trane units sit alongside ductwork that hasn’t been opened in decades. He’s the one who taught the crew to check the secondary drain pan under Hyperion coils first, every time, because that’s where problems hide.
Every Trane service visit starts with a written price before any work begins. The technician’s name and photo arrive before the visit, and they show a photo ID badge at the door. That’s the Threshold Standard, and it applies to every job we do, whether it’s a RunTru in a 1980s condo or a full XV20i system in a 1920s Mediterranean Revival home. You’ll know who’s coming, what it costs, and what we found before we start the work.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in West Palm Beach
- Dust and pet hair packing the secondary drain pan under Hyperion coils. The low-profile pan on Trane Hyperion 7 Series air handlers (TAM7, TAM9) sits almost flush with the cabinet base. That tight clearance catches lint, fur, and dust that would drain elsewhere in other brands. In West Palm Beach, the constant AC from March through November means that debris gets wet, dries, and cakes into a mat that blocks drainage. That’s the sticky gray layer we find under almost every Hyperion coil in this city.
- Return-side duct leakage pulling humid attic air into the blower cabinet. Older Trane systems in West Palm Beach often have flex duct from the 1990s and 2000s that’s sagging and separated at the plenum. That gap pulls in attic air that’s 110 degrees and 80 percent humidity. The blower wheel lives in that airflow, and it grows microbial growth that recirculates through the whole house. You smell it first, a musty hit when the system kicks on.
- Variable-speed ComfortLink II boards throwing airflow errors. The Trane XV20i heat pump paired with a Hyperion air handler uses a variable-speed blower motor that compensates for resistance. When return-side restriction or a dirty evaporator coil raises static pressure beyond the motor’s range, the ComfortLink II board throws a code and the system goes into reduced airflow. The compressor still runs. The house gets warm. Homeowners think the Trane is failing when the real problem is ten pounds of dust on a coil.
- Clogged drain lines tripping the condensate float switch during afternoon thunderstorms. West Palm Beach humidity spikes in summer, and condensate pours off Trane coils in gallons. When the drain line is partially restricted with biological growth, the Pan switch trips intermittently. The system shuts off at 3 PM, restarts at 7 PM, and shuts off again overnight. It’s not a board failure. It’s a drain line that needed cleaning months ago.
- Rusting galvanized steel ducts in historic neighborhoods. In El Cid and Flamingo Park, many homes still have original galvanized steel ducts from the 1940s and 1950s. Decades of salt-laden humidity from the Intracoastal have rusted seams and joints. Those rust particles blow from the vents as fine red dust, and the musty odor embedded in the metal never leaves without mechanical cleaning and sealing. Trane equipment connected to that ductwork inherits the problem, no matter how new the unit is.
Trane Parts & Our Repair-vs-Replace Approach
We use OEM-spec filter media and antimicrobial coil treatments sized for Trane’s coil geometry. The Hyperion coil is deeper and wider than most aftermarket treatments assume, and a generic spray will not reach the fin surfaces where growth takes hold. But we won’t sell you a part that hurts your system. If someone installed a hyper-restrictive HEPA-style aftermarket filter on a variable-speed Trane, we’ll tell you to remove it and reset the system to factory airflow. A choked variable-speed blower shortens compressor life, and fixing the duct leak that made you reach for that filter is the honest repair.
When we decide between repair and replace, we look at the static pressure, the condition of the coil fins, the age of the duct run, and what’s actually failing. We’d rather mastic-seal a 6-inch return separation and clean the blower than sell you a new filter housing that masks the problem. Call (728) 231-8154, and we’ll walk you through what we see.
Our Trane Service Process – Step by Step
- 1
Diagnosis. We measure static pressure on your Trane system against the manufacturer’s spec, inspect the blower wheel, evaporator coil, secondary drain pan, and return duct connections. On Hyperion units, we go straight for that low-profile pan under the coil because that’s where West Palm Beach’s humidity concentrates its damage.
- 2
Repair or install. We clean the blower and evaporator with negative-pressure extraction so the debris actually leaves the cabinet instead of floating into the duct run. We mastic-seal any return-side gaps, replace OEM-spec filter media, and treat coils with antimicrobial products sized for Trane’s fin depth.
- 3
Test. After the repair, we run the system and measure again. The airflow numbers should return to Trane’s factory spec. We had a TAM7 Hyperion in a 2010s West Palm Beach ranch where an XV20i heat pump ran all day but far bedrooms stayed warm. The blower wheel carried a quarter-inch of gray lint, and the return duct had a 6-inch separation at the plenum. After cleaning and sealing, airflow in the far bedroom jumped from 90 CFM to 210 CFM on the same fan speed.
- 4
Warranty. Every repair gets a written guarantee. If a covered repair doesn’t hold, we come back at no charge. That’s our 365-Day Done Right Promise, in writing, on every Trane job.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in West Palm Beach
We service the full range of Trane equipment found in Wellington Trane service homes and throughout the area. Trane XV20i variable-speed heat pumps matched with Hyperion air handlers. Trane XR14 and XR16 single-stage and two-stage systems. Hyperion 7 Series air handlers, including TAM7 and TAM9. And RunTru by Trane packaged units, the compact systems common in Florida condos from downtown to Palm Beach Lakes Boulevard. Our service covers evaporator coil cleaning, blower cleaning, and duct sealing. We keep the common OEM-spec media sizes and coil treatments for these units on the truck, which means fewer return trips and faster turnaround.
We Also Service These Brands
We’re Trane specialists, but not Trane-only. The same crew services Lennox and Carrier systems across West Palm Beach, and the same care applies. If you have a mixed system with a Trane condenser and a different brand air handler, we handle that combination without blinking.
FAQs – Trane Air Duct Cleaning Service in West Palm Beach
Because bleach doesn’t remove the mat of debris that’s packed into the low-profile secondary drain pan under your Hyperion coil. That pan sits nearly flush with the cabinet base, and in West Palm Beach’s humidity, dust and lint turn into a wet, caked layer that blocks drainage. Bleach moves through the line but leaves the mat in place. The fix is mechanical removal and a proper coil treatment. Call (728) 231-8154 for a diagnosis.
Proper Air Duct Cleaning by an independent service provider does not void a Trane warranty, as long as the work follows manufacturer specifications for air flow and static pressure. We measure and document everything. We’re not authorized by Trane, which means our measurements and our written guarantee stand on their own.
Yes. When ducts are restricted by years of debris, the variable-speed blower compensates until it can’t, and the system runs with reduced airflow across the coil. That raises pressures and temperatures at the compressor. Over thousands of hours in West Palm Beach’s year-round AC season, that shortens the life of the compressor in your XV20i or XR16. Cleaning and sealing restores airflow and drops the strain.
The core process is the same: negative-pressure extraction, blower cleaning, evaporator coil cleaning, and static pressure testing. RunTru packaged units are tighter inside than the hyperion split systems, so the physical access is different, and the coil is smaller. But the failure pattern in West Palm Beach condos is consistent: dust and humidity blocking the coil, restricted airflow, and a compressor working harder than the RunTru design intended.
In Trane in Boynton Beach and West Palm Beach, with AC running from March through November and salt air adding corrosion pressure, we recommend cleaning every 2 to 3 years. Homes near the Intracoastal or with pets may go shorter. If you smell mustiness when the Trane kicks on, or see rust dust from old galvanized ducts in El Cid or Flamingo Park, that’s a sign to call (728) 231-8154 for a free estimate.
Trane duct cleaning in West Palm Beach typically runs between $450 and $900 for a full system, depending on the number of trunks, the condition of the ducts, and whether we’re sealing return-side leaks. Coil and blower cleaning adds $150 to $300. Condos with long, complex runs can run higher. The price is always in writing before work starts. Call (728) 231-8154 for an exact quote on your Trane system.
Book Your Trane Service in West Palm Beach, FL
If your Trane system is blowing warm, smelling musty, or running nonstop in a West Palm Beach summer, call (728) 231-8154. We’ll set a time, send you the technician’s name and photo before the visit, and put the price in writing before anything gets opened. If we wouldn’t leave it in our own ceiling, we’re not leaving it in yours.
Written by Marcus Veale, Owner at Linden Air Duct West Palm Beach, serving West Palm Beach since 2004.