Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Register & Grille Cleaning: The West Palm Beach Owner’s Guide
If your Rotobrush system’s register and grille cleaning attachment is worn, cracked, or no longer seating properly, we stock compatible replacements and can usually install them the same week in West Palm Beach. Most register and grille cleaning parts for Rotobrush systems run between $45 and $180 installed, depending on the exact fitting and whether we replace just the brush head or the full attachment assembly. What we see most often in this market: someone notices the bristles have gone flat, airflow at the register is weaker than it used to be, or the attachment won’t lock into the vacuum hose the way it did when it was new.
Which Rotobrush Models This Applies To
Rotobrush has shipped several air duct cleaning platforms over the years, and the register and grille cleaning components don’t all interchange. The AiR+ and the older R500 series take different fittings, and the brush collars changed subtly between production runs. The fastest way to confirm what you need: look for the label on your vacuum body or the stamp on the old attachment’s collar, then check the inner diameter with a tape measure. If yours is gone or faded, call us and we’ll walk you through identifying it while you’re standing at the unit.
We’re an independent service provider, not affiliated with Rotobrush. What that means in practice: we stock both OEM Rotobrush components and quality aftermarket equivalents, and we’ll tell you which one makes sense for your machine. On newer units still under warranty, we recommend OEM. On older units where the OEM part costs more than the machine is worth, a well-made aftermarket fitting often does the job for less. We don’t push the pricier option unless there’s a real reason to buy it.
Styles & brands we work with
Signs Your Rotobrush Register & Grille Cleaning Is Failing
- Bristles are flattened or falling out. Register brushes live a rough life, especially in older West Palm Beach homes where years of dust, sand, and humidity have baked deposits onto the grille surfaces. Once the bristles lose stiffness, the brush slides over dirt instead of lifting it.
- The attachment won’t stay seated in the hose. The plastic collar on Rotobrush fittings is a common failure point. Florida heat accelerates the fatigue, and once that collar cracks or warps, suction drops at the register because air is leaking at the connection.
- You hear a whistle or hiss at the register. That’s air bypassing the attachment, not a normal operational sound. It means the seal isn’t holding, and the brush isn’t getting the negative pressure it needs to pull debris into the collection system.
- You’re seeing debris left behind after cleaning. The whole point of register and grille cleaning is removal, not redistribution. If you’re finding grit pushed back into the vent after a pass, the brush head is done or the wrong size for your openings.
- The attachment is visibly warped or has hairline cracks. Rotobrush components are durable, but they’re not immune to being dropped on tile or left in a hot van. Hairline cracks widen under vacuum stress, and once they do, performance falls off fast.
Replacement Cost & What’s Included
In West Palm Beach, expect to pay between $45 and $180 installed for a Rotobrush-compatible register and grille cleaning replacement. The spread comes down to three things: whether you need a brush head only or a full attachment assembly, whether your unit takes OEM or aftermarket, and whether we’re replacing one component or the full set of fittings for your system. The price we quote is the price you pay: one flat figure per system, in writing, before any work starts. That includes the part, the labor to install and test it, and a check that the attachment seats properly against your vacuum’s hose system. No per-fitting add-ons, no surprise invoice at the door.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a register and grille cleaning attachment is one of the safer things you can do on a Rotobrush system. There’s no high-tension spring involved and no electrical work. If the old attachment slides off and the new one seats with a firm click, you’re likely fine. Where DIY goes sideways is when the collar is cracked and the fitting stays stuck inside the hose, or when the replacement you ordered online doesn’t actually match your model’s locking mechanism. We’ve pulled more than a few of those out with a careful hand after someone spent an hour fighting it. If you’d rather not gamble on the right part, call us at (728) 231-8154 and we’ll match it correctly the first time.
FAQs
For a professional using the tool weekly, one to three years is realistic before the bristles lose stiffness or the collar starts to weaken. In West Palm Beach’s humidity and heat, plastic collars tend to fail on the shorter end of that range. Homeowners using it once or twice a year will get much longer life.
No. Adhesives and tape don’t hold under negative pressure, and a repaired crack will leak air and reduce suction at the register. When the collar goes, replacement is the only fix that actually works.
If you bring the unit to us, the replacement takes about fifteen minutes. On a service call in West Palm Beach, we can install and test it inside a standard appointment window, and we’ll verify the seating and suction before we leave.
Yes. We keep common Rotobrush-compatible register and grille cleaning fittings on hand for the AiR+ and R500 series, along with aftermarket equivalents for older units. If we don’t have your exact fitting on the truck, we’ll tell you honestly and order it rather than forcing a wrong part.
Need a Correct Part the First Time? Call Us
If your Rotobrush register and grille cleaning attachment is done, call us at (728) 231-8154 for a free estimate on the replacement. We’ll identify your unit, confirm the right fitting, and give you one written price before anything gets installed. If the part doesn’t seat perfectly and hold suction the way it should, we’ll make it right under the 365-Day Done Right Promise. That’s how we’ve handled every job since 2004, and it’s how we’ll handle yours.
Written by Marcus Veale, Owner, Linden Air Duct West Palm Beach at Linden Air Duct West Palm Beach, serving West Palm Beach and nearby areas.