Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Air Duct Cleaning in West Palm Beach: What to Know First
We provide independent Nikro air duct cleaning in West Palm Beach for homes and businesses running Nikro negative-air duct cleaning systems and related commercial-grade air handling equipment. A typical residential Nikro system cleaning takes half a day to a full day depending on ductwork length and access, and we quote the job before we touch anything so you know the real number going in. If you own a Nikro unit and want a crew that understands the equipment as well as the ductwork it services, call (728) 231-8154 for a free estimate.
This page is for Nikro owners in West Palm Beach specifically: people who bought or inherited a Nikro system, who know the equipment was built for serious commercial-grade extraction work, and who want it maintained correctly. We’re an independent Nikro service provider, not a manufacturer-authorized shop, which means we give you straight answers about what your system actually needs rather than the factory recommendation line.
How Nikro Products Fail – and How We Fix Them
- Nikro AV/C Series motors losing suction under load. The AV/C line uses high-airflow motors that pull a lot of current, and in West Palm Beach’s salt-heavy coastal air, the motor brushes and commutator wear faster than inland units experience. Owners report the unit sounds fine at idle but drops vacuum the moment a 50-foot hose run is connected. We test motor current draw under a simulated duct load, replace worn brushes or the full motor assembly with OEM-spec parts, and verify static pressure before we call it done.
- HEPA filter bypass on older Nikro HEPA VAC models. The gaskets around the HEPA filter housing on older Nikro units are flat foam, and after 3-5 years in Florida humidity they compress and leak. That means air bypasses the filter entirely, which defeats the purpose of HEPA filtration. We replace the gasket, reseat the filter, and run a particle count test at the exhaust to prove the seal is actually holding.
- Nikro blower wheel imbalance from dust and debris buildup. The forward-curved blower wheels on Nikro units accumulate fine dust on the blade faces over time, and in West Palm Beach homes where drywall dust and sand are common, that buildup becomes uneven enough to cause vibration and bearing wear. Owners describe it as a “wobble” that gets worse at higher speeds. We pull the blower assembly, clean the wheel blades individually, replace bearings if there’s play, and rebalance before reassembly.
- Hose-end tool wear on Nikro duct cleaning heads. The stainless steel whip heads and brush attachments on Nikro systems take real abuse, especially in older West Palm Beach construction where duct seams have sharp edges and screws protruding into the airflow path. Over time, the attachment collar stretches and the tool spins off the hose inside the duct, leaving a brush head stuck 15 feet in. We run a video inspection whenever tool retrieval is needed, and we stock replacement collars and heads that match Nikro’s hose sizes so you are not waiting on a factory backorder.
- Control switches and thermal overloads on Nikro units used for long commercial runs. Commercial duct cleaning runs in West Palm Beach office buildings and medical suites often push a Nikro machine for 6-8 continuous hours. The toggle switches and thermal overload relays on the control panel are the first things to go. We keep common replacement switches in the truck, and on commercial jobs we pre-check these before the crew starts so a failed switch does not strand the job halfway through.
Styles & brands we work with
Our Nikro Air Duct Cleaning Process
- 1
Phone walkthrough and written estimate. You call (728) 231-8154 and describe your Nikro setup: the model if you know it, the building type, approximate duct run lengths, and what you’re seeing or smelling from the supplies. We give you a written price range before we schedule, no deposit required.
- 2
On-site inspection and video confirmation. We show up, confirm the Nikro unit’s condition, and run a video camera down at least one supply and one return run. You see exactly what is in there before we cut any access points.
- 3
Access point planning and sealing. We map the cleanest access locations, usually at the plenum and at the farthest register, then cut clean openings sized to our Nikro-compatible tooling. We use sealable access covers that stay in place for future service.
- 4
Negative-pressure extraction with Nikro-grade equipment. The system is set under negative pressure using professional-grade extraction equipment. Every supply and return branch is worked individually with agitation tools matched to the duct diameter and material.
- 5
Component inspection and honest repair callout. If the Nikro unit itself shows a problem, like a HEPA seal leak or a motor pulling high current, we show you the test numbers and give you a repair price before we do the repair. No surprise invoices at the end.
- 6
Post-clean verification and system test. We re-run the video inspection on the main trunk lines, check airflow at several registers, and confirm the Nikro unit is holding proper static pressure. Then we walk you through everything and hand you the before-and-after footage.
See the difference
Before
After
Before
After
Before
AfterWhat Nikro Air Duct Cleaning Costs in West Palm Beach
Here’s what we quote in West Palm Beach for Nikro system cleaning work. These are whole-job prices, not per-vent teaser rates.
| Service | Typical Price Range |
|---|---|
| Residential supply and return duct cleaning, single system | $425 – $750 |
| Full-system residential cleaning with video inspection | $550 – $900 |
| Nikro unit service check (HEPA seal, motor current, filter condition) | $95 – $185 |
| Blower wheel cleaning or replacement part | $150 – $400 |
| Commercial duct cleaning, single floor or suite | $900 – $2,200 |
What moves the price in West Palm Beach: duct run length, how many access points we need to cut, the age of the ductwork, and whether the Nikro unit itself needs motor or seal work. The price we put in writing before the job starts is the price you pay. Every repair includes a written guarantee, and if a covered repair fails within 365 days, we return and make it right at no charge. Call (728) 231-8154 for an exact quote tailored to your system.
Why West Palm Beach Homeowners Call Linden Air Duct West Palm Beach for Nikro Work
We’ve been running air duct cleaning jobs in West Palm Beach for years now, and a lot of what we do involves undoing the work of crews that rushed through a job and left half the debris in the trunk line. Marcus Veale, our owner, came up through a vocational HVAC program at Los Angeles Trade-Technical College before shifting into duct cleaning full time, and he still runs point on the more complicated Nikro diagnostics himself. His test for every job is simple: if he wouldn’t leave it in his own ceiling, he’s not leaving it in yours.
The Threshold Standard applies to every tech who steps onto your property: background-checked, identity-verified, and introduced to you by name and photo before they arrive. They show a photo ID badge at the door. The quote is written before work begins, the guarantee is written on every repair, and a live person answers the phone 24/7. We also work on Lennox, Trane, and Carrier systems for residential ductwork, so if your Nikro system is part of a larger setup, one crew handles all of it.
FAQs
No. We are an independent Nikro service provider in West Palm Beach. We use OEM-spec parts where they matter, like HEPA filters and motor assemblies, and we do not claim manufacturer authorization. What we claim is that we know these units well enough to tell you what actually needs fixing and what does not.
Most West Palm Beach residential calls are scheduled within a few days to a week. We do not promise same-day dispatch, because we do not want to send someone rushed. If the problem is straightforward, like a clogged filter or a failed gasket, the repair is usually done in a single visit.
For filters, gaskets, and motor assemblies, we use OEM-spec Nikro parts whenever they’re available. For hose collars, brush heads, and other wear items, we use quality aftermarket parts that match Nikro’s sizing. We’ll tell you which is which before we install anything, and the price reflects the difference. Every part we install is covered by our written repair guarantee.
You see it. We run a video camera through your ductwork before and after the job, and you get the footage. If the camera shows a section we missed or a trunk line still carrying debris, we clean it again before we leave. The 365-day guarantee means if something we cleaned re-contaminates within a year, we come back and correct it at no charge.
If you own a Nikro system in West Palm Beach and want a straight answer about what your ductwork actually needs, call (728) 231-8154. We’ll walk the job over the phone, give you a written estimate, and send a technician whose name and photo you will have before they ever knock on the door.
Written by Marcus Veale, Owner, Linden Air Duct West Palm Beach at Linden Air Duct West Palm Beach, serving West Palm Beach and nearby areas.